CUSTOM CONDENSER FOR CMEP-OL (INSTALLED)

$400.00

  • THIS PURCHASE COVERS THE HARDWARE & INSTALLATION BY OUR SERVICE DEPARTMENT
  • YOU MUST HAVE YOUR PUMP ON-LOCATION FOR THIS INSTALL

HOW DO I  BENEFIT? 

  • improved recovery rate
  • reduced noise pollution
  • longer compressor life expectancy
  • reduced internal head pressure lower back pressure
  • decreased stress on internal components
  • fewer hoses, fewer connections

22 in stock

Category: SKU: LCC200

Description

KIT CONTENTS: 1-EGI Liquid-cooled condenser coil-in-box (custom built for CMEP-OL),  1-pair of compression fittings,  1-PTFE lined stainless steel braided hose with threaded compression ends,  4-bolts,  4-washers, 4-nuts. The LCC condenser box hose connections are 1/4″ FNPT in size.

TESTED ON SITE:  Please keep in mind that every liquid-cooled condenser (LCC) is pressure tested on-location to ensure that it holds up to 150 PSI without leaking.

Recommendations For Recirculating Coolant:

On a limited budget? Use ice (or dry ice) and water as your coolant. For recirculating your liquid through the LLC, we recommend that at a minimum you use a basic pond or waterfall pump that circulates a minimum of 200 gallons of liquid per hour.

Got a bigger budget?  We recommend that you use a recirculating chiller with a minimum cooling power of 500 watts (.5 kilowatts) for each CMEP-OL in operation.  Use a recirculating chiller that has a increased cooling power when using multiple CMEP-OL’s.  When striving for those really cold temperatures, we recommend using Dylanene HC-50 (-150F freezing point), ethylene glycol (-80F freezing point), or propylene glycol (-50F freezing point) as your coolant.

Additional information

Weight 9.1 lbs
Dimensions 12.5 × 10 × 20 in

Need more information? Fill out the information below.

[contact-form-7 404 "Not Found"]