Ai -75°C 10L Recirculating Chiller with 30L/Min Centrifugal Pump

$19,990.00

Categories: , SKU: C80-10

Description

The re-designed Ai C80-10 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.

Ai C80-10 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

IMPORTANT! -75°C ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO JACKETED REACTORS ATTACHED).

C80-10 circulating chiller features

  • ETL tested to UL and CSA standards
  • No dry ice or liquid nitrogen needed
  • Advanced PID digital temp controller
  • Built-in chilling fluid filter protects the recirculating pump and prevent blockage
  • All steel construction for durability
  • Cost saving as the water consumption is completely eliminated
  • Built-in casters for mobility
  • Plug and play, no assembly required
  • Recommended for Ai 20L jacketed reactors (jacket volume 6L)

Specifications

 

 Model  C80-10
 Working temperature range  -60°C to -75°C (unit is not designed to run at temperature hotter than -60°C)
 Electrical requirements  220V 60Hz 1-PH 22A, 4750 watts
 Compressor  Make: KK
Power: 208-230V 60Hz 1-Phase
Number of compressor: two
Refrigerant: R404A (2680g) and R23 (710g)
 Cooling capacity (assuming
working environment is
25°C or 77°F)
 @ -40°C:       2000W
@ -50°C:       1500W
@ -60°C:       1000W
@ -75°C:       280W
@ -78°C:       180W
 Reservoir  Capacity: 10 liters or 2.6 gallons
Dimensions: 17.5 x 7 x 8.5 inches (LxWxH)
Material: Type 304 stainless steel
Chilling fluid connection: 1/2″ NPT
Drain port: 3/8″ barb
 Recirculating pump  Pump type: Centrifugal
Model: 25PLBR30-10
Pumping speed: 8 gallon/min or 30L/min
Power: 280W
Pressure: 1 bar
 Radiator  Fan motor
Make: Boyoung
Model: YWF 4E-350
Power: 220V 60Hz 0.8A 180W
Rotation speed: 1600rpm
Flow rate: 2500 m2/hour
Cleaning
Clean radiator fins with a fin comb every three months
 Working environment requirements  Temperature: between 5°C to 35°C
Humidity: < 70%
 Temperature controller  Digital microprocessor PID controlled
Accuracy: +/- 2°C
Display unit: Celsius °C
 Tempeature sensor type  Pt100
 Housing  Powder coated type 42 stainless steel
 Built-in swivel casters  Four
 Safety  Compressor over-heat protection
Short circuit and ground protection
Over-current protection
Over-voltage protection
Over-heat protection
 Unit/shipping weight  515 lbs / 615 lbs
 Unit/shipping dimensions  38.5 x 25 x 52 inches / 44 x 30 x 64 inches (DxWxH)
 Compliance  UL 61010-1 :2012 Ed.3+R:29Apr2016
CSA C22.2#61010-1 :2012 Ed.3

 

Additional information

Weight 500 lbs
Dimensions 45 × 45 × 60 in

Reviews

There are no reviews yet.

Be the first to review “Ai -75°C 10L Recirculating Chiller with 30L/Min Centrifugal Pump”

You May Also Like

Need more information? Fill out the information below.

[contact-form-7 id=”18751″ title=”Contact Us Page”]