Ai -40°C Cold Trap with LS Stainless Steel Traps ETL

$5,040.00

Categories: , SKU: T40-UL-LS

Description

The Ai 2nd Gen -40°C/F T40 cold traps are ETL certified. They have a much smaller footprint, but at the same time, offering you the same cooling power.

In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.

Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the cavity.

Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold.

Ai T40-UL -40°C/°F cold trap features

  • Comes with Lab Society stainless steel trap
  • No dry ice or liquid nitrogen needed
  • All steel housing for durability
  • Small footprint, built-in swivel casters for mobility
  • Plug and play, no assembly required
  • ETL tested to UL and CSA standards

 

Specifications

 

 Model  T40-UL
 Electrical requirements  110V or 220V, 60Hz 1-PH
 Compressor  Make: Embraco
Refrigerant: R404A (220g)
Cooling capacity:
@ -10°C: 300W
@ -20°C: 250W
@ -30°C: 150W
@ -40°C: 50W
 Reservoir  Volume
1.3 gallon (5 liters)
 Dimensions
Diameter 6 1/4 inches
Depth: 9 1/2 inches
 Temperature  -40°C (-40°F)
Display: digital
Unit: °C
Sensor: PT100
 Finish  Exterior: powder coated steel
Interior: polished type 304 stainless steel
 Trap  Material: stainless steel
Make: Lab Society
Connection: KF25 x 2
Construction: 6 tier mesh pates, silicone insulating ring
 Recommended coolant  50% Ethylene glycol + 50% purified water
 Unit/shipping weight  105 lbs / 145 lbs
 Unit/shipping dimensions  13 x 18 x 26″ / 18 x 23 x 38″ (WxDxH)
 Compliance  UL 471:2010 Ed.10+R:08Dec2016
CSA C22.2#120 Issued: 2013/03/01 Ed: 4 Refrigeration Equipment
 Warranty  One year

 

Additional information

Weight 155 lbs
Dimensions 24 × 20 × 37 in

Reviews

There are no reviews yet.

Be the first to review “Ai -40°C Cold Trap with LS Stainless Steel Traps ETL”

You May Also Like

Need more information? Fill out the information below.

[contact-form-7 id=”18751″ title=”Contact Us Page”]